Games that are Tier 3 (Ready) render full screen across their supported layout orientations and anchor aspect ratios when display bounds match on large screens and foldables. They handle dynamic configuration changes—such as folding, unfolding, rotation, and window resizing—without losing state or offsetting touch inputs, and they support multi-window and multi-resume continuity. When the window orientation or aspect ratio differs, the game renders clean letterboxes or pillarboxes.

The guidelines on this page apply directly to foldables and tablets. Other form factors, such as desktops, TVs, car displays, and XR, have additional form-factor-specific requirements. Games distributed on those devices must also meet the Tier 3 requirements for each form factor where you distribute them.
Expected player experience
A Tier 3 game feels natural, stable, and uninterrupted on any large screen or foldable device. Players can launch the game on an unfolded foldable or tablet and play immediately without system compatibility overrides, cropped heads-up display (HUD) buttons, or stretched graphics. If a player unfolds their phone mid-match, rotates the device, or resizes the window in split-screen mode, the game transitions smoothly without crashing, restarting the level, losing audio sync, or shifting touch hit-boxes. The game must also meet the Tier 3 requirements for each form factor where you distribute the game.
Do
Follow these best practices to provide a Tier 3 experience:
- Render full screen across supported foldable and tablet anchor aspect ratios: 1:1, 10:9, and 4:3 in landscape (1:1, 9:10, and 3:4 in portrait) for unfolded foldable inner screens, and 16:10 in landscape (10:16 in portrait) for tablets and folded passport-style foldable cover screens. For portrait-only games, support rotating to landscape on both unfolded foldables and tablets (rendering full screen on 1:1 and 10:9 inner screens, and cleanly pillarboxing on 4:3 and 16:10 displays). For landscape-only games, support rotating to portrait on unfolded foldable inner screens (rendering full screen on 1:1 and 9:10 inner screens, and cleanly letterboxing on 3:4 inner screens), while portrait rotation isn't required on tablets (10:16) or folded cover screens.
- Preserve active gameplay state, camera viewport, audio sync, and accurate touch hit-boxes across folding and unfolding, device rotation, and multi-window resizing.
- Support multi-window split-screen and multi-resume focus transitions, including camera preview and media projection continuity where applicable.
Don't
Avoid the following common issues:
- Rely on OS or manufacturer compatibility mode letterboxing. Instead,
declare
android:resizeableActivity="true". - Let HUD buttons, health bars, or menus get clipped by camera cutouts, gesture bars, or multi-window split-screen control headers.
- Restart the activity, drop multiplayer connections, or desync touch coordinates when the device folds, unfolds, rotates, or resizes.
- Stretch or compress the game viewport, characters, or UI elements (non-uniform aspect-ratio scaling) to fill the screen instead of adapting the camera field of view (FOV) or cleanly letterboxing or pillarboxing.
Guidelines
The following sections describe the Tier 3 quality guidelines for games on large screens and foldables.
Display and aspect ratios
The following table describes the display and aspect ratio guidelines:
| Guideline ID | Test IDs | Description |
|---|---|---|
Landscape_Display |
T-Landscape_Display |
Games displayed in landscape render full screen without letterboxing or pillarboxing across foldable and tablet landscape aspect ratios (1:1, 10:9, 4:3, and 16:10):
The game doesn't run in OS compatibility mode
( |
Landscape_Rotation |
T-Landscape_Rotation |
On unfolded foldable inner displays, landscape-only games support rotating to portrait orientation (rotating right-side up when the unfolded foldable is rotated):
|
Portrait_Display |
T-Portrait_Display |
Games displayed in portrait render full screen without letterboxing or pillarboxing across foldable and tablet portrait aspect ratios (1:1, 9:10, 3:4, and 10:16):
The game doesn't run in OS compatibility mode
( |
Portrait_Rotation |
T-Portrait_Rotation |
On both unfolded foldables and tablets, portrait-only games don't lock orientation on unfolded foldables and support rotating to landscape orientation (rotating right-side up when the device is rotated):
|
Insets_And_Cutouts |
T-Insets_And_Cutouts |
The game queries and respects actual visible window insets—even after requesting immersive full-screen mode—so game controls, HUDs, and UI elements aren't obscured by mobile status, navigation, or gesture bars, display cutouts (such as notches and punch holes), multi-window split-screen control headers, or persistent bottom taskbars and Kids mode navigation bars. |
Configuration and continuity
The following table describes the configuration and continuity guidelines:
| Guideline ID | Test IDs | Description |
|---|---|---|
Config_Changes |
T-Config_State |
The game supports configuration changes—such as device rotation, folding and unfolding (including sequential transitions such as rotating after unfolding), multi-window resizing, and display changes—without crashes, ANRs, level restarts, visual artifacts, or touch mapping offsets where visual UI buttons desync from their touch hit-boxes. The game preserves active game state and player progress:
|
Multi-window mode and multi-resume
The following table describes the multi-window mode and multi-resume guidelines:
| Guideline ID | Test IDs | Description |
|---|---|---|
Multi-Window_Functionality |
T-Multi-Window_Functionality |
The game is fully functional and playable in multi-window split-screen mode, including when running in a 50/50 split-screen window. |
Multi-Resume |
T-Multi-Window_Focus,T-Multi-Window_Resources
|
The game supports multi-resume and window focus transitions in multi-window scenarios:
|
Camera preview and media projection
The following guidelines apply only to games that use the device camera or
MediaProjection APIs:
| Guideline ID | Test IDs | Description |
|---|---|---|
Camera_Preview |
T-Camera_Preview |
If the game displays a camera preview (for example, AR gameplay,
QR scanning, or avatar and profile photo capture): the game provides
a camera preview in landscape and portrait orientations, folded and
unfolded device states, and multi-window mode, with proper proportions
and orientation (no stretching, cropping, or inversion). The game
doesn't enforce a hard manifest requirement on a rear- or world-facing
camera (setting |
Media_Projection |
T-Media_Projection |
If the game uses |
Tests
To confirm that your game meets the Tier 3 (Ready) requirements, run the following verification tests.
Display and aspect ratios
The following table describes the display and aspect ratio tests:
| Test ID | Guideline IDs | Description |
|---|---|---|
T-Landscape_Display |
Landscape_Display |
On foldable and tablet devices, test the game in landscape orientation across the core foldable and tablet landscape aspect ratios (1:1, 10:9, and 4:3 for unfolded foldable inner displays; 16:10 for tablets and folded passport-style cover displays). Verify that if the game supports landscape, it fills the entire window without letterboxing or pillarboxing and doesn't run in OS compatibility mode. |
T-Landscape_Rotation |
Landscape_Rotation |
If the game is landscape-only, rotate the unfolded foldable 90 degrees to portrait orientation and verify that the game rotates right-side up: on square and near-square inner displays (1:1 and 9:10) it continues rendering full screen, and on 3:4 inner displays it cleanly letterboxes itself with centered framing and working touch targets (portrait rotation isn't required on 10:16 tablets or folded cover screens). |
T-Portrait_Display |
Portrait_Display |
On foldable and tablet devices, test the game in portrait orientation across the core foldable and tablet portrait aspect ratios (1:1, 9:10, and 3:4 for unfolded foldable inner displays; 10:16 for tablets and folded passport-style cover displays). Verify that if the game supports portrait, it fills the entire window without letterboxing or pillarboxing and doesn't run in OS compatibility mode. |
T-Portrait_Rotation |
Portrait_Rotation |
If the game is portrait-only, rotate the unfolded foldable or tablet 90 degrees to landscape orientation and verify that the game rotates right-side up: on square and near-square inner displays (1:1 and 10:9) it continues rendering full screen, and on rectangular landscape displays (4:3 and 16:10) it cleanly pillarboxes itself with centered framing and working touch targets. |
T-Insets_And_Cutouts |
Insets_And_Cutouts |
Launch the game across phone, foldable (folded and unfolded), and tablet displays in all supported orientations (including multi-window split-screen and modes with persistent bottom bars such as taskbars or Kids mode). Verify that no interactive game controls, HUD buttons, or critical text are obscured by status, navigation, or gesture bars, display cutouts, persistent bottom bars, or split-screen control headers. |
Configuration and continuity
The following table describes the configuration and continuity tests:
| Test ID | Guideline IDs | Description |
|---|---|---|
T-Config_State |
Config_Changes |
During active gameplay (and on screens with scrollable menus, audio or cutscene playback, or text entry fields), rotate the device between landscape and portrait orientations, fold and unfold the device, resize the game window in multi-window mode, and minimize and restore the window. Verify the following:
|
Multi-window mode and multi-resume
The following table describes the multi-window mode and multi-resume tests:
| Test ID | Guideline IDs | Description |
|---|---|---|
T-Multi-Window_Functionality |
Multi-Window_Functionality |
Open the game in multi-window mode. Check that the game is fully playable across window sizes, orientations, and folded or unfolded states. Unity games: open an app other than your Unity game and place it in split-screen mode. Open your Unity game alongside it. Go to the Home screen to hide the app pair, and then open the Recents screen and select the split-screen app pair. Verify that the Unity game resumes its activity cleanly with the correct layout and accessible UI elements. |
T-Multi-Window_Focus |
Multi-Resume |
Open the game in multi-window or desktop windowing mode alongside a second app and click into the second app to make it the top focused window, testing focus loss and return. Verify that the game doesn't crash, freeze (ANR), or lose its graphics surface when unfocused; single-player or offline gameplay pauses cleanly (or continues updating without freezing); online or multiplayer gameplay maintains its network connection without disconnecting; and game audio mutes or ducks appropriately. |
T-Multi-Window_Resources |
Multi-Resume |
If the game uses the camera or microphone: open the camera or enable voice chat in the game while in multi-window mode, and then switch focus to the second app. Verify that the unfocused game relinquishes the camera or microphone and regains access when returned to focus. |
Camera preview and media projection
The following table describes the camera preview and media projection tests:
| Test ID | Guideline IDs | Description |
|---|---|---|
T-Camera_Preview |
Camera_Preview |
If applicable: open the game full screen and in multi-window mode, and start the camera from within the game, including on a device with only a front-facing camera, and switch cameras where multiple exist. Rotate the device, fold and unfold the device, and resize the window. Verify that the camera preview defaults cleanly and displays in the proper orientation and proportions in all states. |
T-Media_Projection |
Media_Projection |
If applicable: open the game full screen and in multi-window mode, and start a media projection. Rotate the device, fold and unfold the device, and resize the window. Verify that the media projection is in the proper orientation and proportions in all states. |