ZoneRules

equals

fun equals(other: Any?): Boolean

Checks if this set of rules equals another.

Two rule sets are equal if they will always result in the same output for any given input instant or local date-time. Rules from two different groups may return false even if they are in fact the same.

This definition should result in implementations comparing their entire state.

getDaylightSavings

fun getDaylightSavings(instant: Instant!): Duration!

Gets the amount of daylight savings in use for the specified instant in this zone.

This provides access to historic information on how the amount of daylight savings has changed over time. This is the difference between the standard offset and the actual offset. Typically the amount is zero during winter and one hour during summer. Time-zones are second-based, so the nanosecond part of the duration will be zero.

This default implementation calculates the duration from the actual and standard offsets.

getOffset

fun getOffset(instant: Instant!): ZoneOffset!

Gets the offset applicable at the specified instant in these rules.

The mapping from an instant to an offset is simple, there is only one valid offset for each instant. This method returns that offset.

getOffset

fun getOffset(localDateTime: LocalDateTime!): ZoneOffset!

Gets a suitable offset for the specified local date-time in these rules.

The mapping from a local date-time to an offset is not straightforward. There are three cases:

• Normal, with one valid offset. For the vast majority of the year, the normal case applies, where there is a single valid offset for the local date-time.
• Gap, with zero valid offsets. This is when clocks jump forward typically due to the spring daylight savings change from "winter" to "summer". In a gap there are local date-time values with no valid offset.
• Overlap, with two valid offsets. This is when clocks are set back typically due to the autumn daylight savings change from "summer" to "winter". In an overlap there are local date-time values with two valid offsets.

Since, in the case of Gap and Overlap, the offset returned is a "best" value, rather than the "correct" value, it should be treated with care. Applications that care about the correct offset should use a combination of this method, getValidOffsets(java.time.LocalDateTime) and getTransition(java.time.LocalDateTime).

getStandardOffset

fun getStandardOffset(instant: Instant!): ZoneOffset!

Gets the standard offset for the specified instant in this zone.

This provides access to historic information on how the standard offset has changed over time. The standard offset is the offset before any daylight saving time is applied. This is typically the offset applicable during winter.

getTransition

fun getTransition(localDateTime: LocalDateTime!): ZoneOffsetTransition!

Gets the offset transition applicable at the specified local date-time in these rules.

The mapping from a local date-time to an offset is not straightforward. There are three cases:

• Normal, with one valid offset. For the vast majority of the year, the normal case applies, where there is a single valid offset for the local date-time.
• Gap, with zero valid offsets. This is when clocks jump forward typically due to the spring daylight savings change from "winter" to "summer". In a gap there are local date-time values with no valid offset.
• Overlap, with two valid offsets. This is when clocks are set back typically due to the autumn daylight savings change from "summer" to "winter". In an overlap there are local date-time values with two valid offsets.

There are various ways to handle the conversion from a LocalDateTime. One technique, using this method, would be:

ZoneOffsetTransition trans = rules.getTransition(localDT);
   if (trans != null) {
     // Gap or Overlap: determine what to do from transition
   } else {
     // Normal case: only one valid offset
     zoneOffset = rule.getOffset(localDT);
   }
  

getTransitionRules

fun getTransitionRules(): MutableList<ZoneOffsetTransitionRule!>!

Gets the list of transition rules for years beyond those defined in the transition list.

The complete set of transitions for this rules instance is defined by this method and getTransitions(). This method returns instances of ZoneOffsetTransitionRule that define an algorithm for when transitions will occur.

For any given ZoneRules, this list contains the transition rules for years beyond those years that have been fully defined. These rules typically refer to future daylight saving time rule changes.

If the zone defines daylight savings into the future, then the list will normally be of size two and hold information about entering and exiting daylight savings. If the zone does not have daylight savings, or information about future changes is uncertain, then the list will be empty.

The list will be empty for fixed offset rules and for any time-zone where there is no daylight saving time. The list will also be empty if the transition rules are unknown.

getTransitions

fun getTransitions(): MutableList<ZoneOffsetTransition!>!

Gets the complete list of fully defined transitions.

The complete set of transitions for this rules instance is defined by this method and getTransitionRules(). This method returns those transitions that have been fully defined. These are typically historical, but may be in the future.

The list will be empty for fixed offset rules and for any time-zone where there has only ever been a single offset. The list will also be empty if the transition rules are unknown.

getValidOffsets

fun getValidOffsets(localDateTime: LocalDateTime!): MutableList<ZoneOffset!>!

Gets the offset applicable at the specified local date-time in these rules.

The mapping from a local date-time to an offset is not straightforward. There are three cases:

• Normal, with one valid offset. For the vast majority of the year, the normal case applies, where there is a single valid offset for the local date-time.
• Gap, with zero valid offsets. This is when clocks jump forward typically due to the spring daylight savings change from "winter" to "summer". In a gap there are local date-time values with no valid offset.
• Overlap, with two valid offsets. This is when clocks are set back typically due to the autumn daylight savings change from "summer" to "winter". In an overlap there are local date-time values with two valid offsets.

There are various ways to handle the conversion from a LocalDateTime. One technique, using this method, would be:

List<ZoneOffset> validOffsets = rules.getValidOffsets(localDT);
   if (validOffsets.size() == 1) {
     // Normal case: only one valid offset
     zoneOffset = validOffsets.get(0);
   } else {
     // Gap or Overlap: determine what to do from transition (which will be non-null)
     ZoneOffsetTransition trans = rules.getTransition(localDT);
   }
  

In theory, it is possible for there to be more than two valid offsets. This would happen if clocks to be put back more than once in quick succession. This has never happened in the history of time-zones and thus has no special handling. However, if it were to happen, then the list would return more than 2 entries.

hashCode

fun hashCode(): Int

Returns a suitable hash code given the definition of equals.

isDaylightSavings

fun isDaylightSavings(instant: Instant!): Boolean

Checks if the specified instant is in daylight savings.

This checks if the standard offset and the actual offset are the same for the specified instant. If they are not, it is assumed that daylight savings is in operation.

This default implementation compares the actual and standard offsets.

isFixedOffset

fun isFixedOffset(): Boolean

Checks of the zone rules are fixed, such that the offset never varies.

isValidOffset

fun isValidOffset(
    localDateTime: LocalDateTime!, 
    offset: ZoneOffset!
): Boolean

Checks if the offset date-time is valid for these rules.

To be valid, the local date-time must not be in a gap and the offset must match one of the valid offsets.

This default implementation checks if getValidOffsets(java.time.LocalDateTime) contains the specified offset.

nextTransition

fun nextTransition(instant: Instant!): ZoneOffsetTransition!

Gets the next transition after the specified instant.

This returns details of the next transition after the specified instant. For example, if the instant represents a point where "Summer" daylight savings time applies, then the method will return the transition to the next "Winter" time.

of

static fun of(offset: ZoneOffset!): ZoneRules!

Obtains an instance of ZoneRules that has fixed zone rules.

of

static fun of(
    baseStandardOffset: ZoneOffset!, 
    baseWallOffset: ZoneOffset!, 
    standardOffsetTransitionList: MutableList<ZoneOffsetTransition!>!, 
    transitionList: MutableList<ZoneOffsetTransition!>!, 
    lastRules: MutableList<ZoneOffsetTransitionRule!>!
): ZoneRules!

Obtains an instance of a ZoneRules.

previousTransition

fun previousTransition(instant: Instant!): ZoneOffsetTransition!

Gets the previous transition before the specified instant.

This returns details of the previous transition before the specified instant. For example, if the instant represents a point where "summer" daylight saving time applies, then the method will return the transition from the previous "winter" time.

toString

fun toString(): String

Returns a string describing this object.