Added in API level 31

VcnManager

open class VcnManager
kotlin.Any
   ↳ android.net.vcn.VcnManager

VcnManager publishes APIs for applications to configure and manage Virtual Carrier Networks.

A VCN creates a virtualization layer to allow carriers to aggregate heterogeneous physical networks, unifying them as a single carrier network. This enables infrastructure flexibility on the part of carriers without impacting user connectivity, abstracting the physical network technologies as an implementation detail of their public network.

Each VCN virtualizes a carrier's network by building tunnels to a carrier's core network over carrier-managed physical links and supports a IP mobility layer to ensure seamless transitions between the underlying networks. Each VCN is configured based on a Subscription Group (see ) and aggregates all networks that are brought up based on a profile or suggestion in the specified Subscription Group.

The VCN can be configured to expose one or more android.net.Network(s), each with different capabilities, allowing for APN virtualization.

If a tunnel fails to connect, or otherwise encounters a fatal error, the VCN will attempt to reestablish the connection. If the tunnel still has not reconnected after a system-determined timeout, the VCN Safe Mode (see below) will be entered.

The VCN Safe Mode ensures that users (and carriers) have a fallback to restore system connectivity to update profiles, diagnose issues, contact support, or perform other remediation tasks. In Safe Mode, the system will allow underlying cellular networks to be used as default. Additionally, during Safe Mode, the VCN will continue to retry the connections, and will automatically exit Safe Mode if all active tunnels connect successfully.

Summary

Nested classes
abstract

VcnStatusCallback is the interface for Carrier apps to receive updates for their VCNs.

Constants
static Int

Value indicating that an error with this Gateway Connection's configuration occurred.

static Int

Value indicating that an internal failure occurred in this Gateway Connection.

static Int

Value indicating that a Network error occurred with this Gateway Connection.

static Int

Value indicating that the VCN for the subscription group is active.

static Int

Value indicating that the VCN for the subscription group is inactive.

static Int

Value indicating that the VCN for the subscription group is not configured, or that the callback is not privileged for the subscription group.

static Int

Value indicating that the VCN for the subscription group is in Safe Mode.

Public methods
open Unit
clearVcnConfig(subscriptionGroup: ParcelUuid)

Clears the VCN configuration for a given subscription group.

open MutableList<ParcelUuid!>

Retrieves the list of Subscription Groups for which a VCN Configuration has been set.

open Unit
registerVcnStatusCallback(subscriptionGroup: ParcelUuid, executor: Executor, callback: VcnManager.VcnStatusCallback)

Registers the given callback to receive status updates for the specified subscription.

open Unit
setVcnConfig(subscriptionGroup: ParcelUuid, config: VcnConfig)

Sets the VCN configuration for a given subscription group.

open Unit

Unregisters the given callback.

Constants

VCN_ERROR_CODE_CONFIG_ERROR

Added in API level 31
static val VCN_ERROR_CODE_CONFIG_ERROR: Int

Value indicating that an error with this Gateway Connection's configuration occurred.

For example, this error code will be returned after authentication failures.

Value: 1

VCN_ERROR_CODE_INTERNAL_ERROR

Added in API level 31
static val VCN_ERROR_CODE_INTERNAL_ERROR: Int

Value indicating that an internal failure occurred in this Gateway Connection.

Value: 0

VCN_ERROR_CODE_NETWORK_ERROR

Added in API level 31
static val VCN_ERROR_CODE_NETWORK_ERROR: Int

Value indicating that a Network error occurred with this Gateway Connection.

For example, this error code will be returned if an underlying android.net.Network for this Gateway Connection is lost, or if an error occurs while resolving the connection endpoint address.

Value: 2

VCN_STATUS_CODE_ACTIVE

Added in API level 31
static val VCN_STATUS_CODE_ACTIVE: Int

Value indicating that the VCN for the subscription group is active.

A VCN is active if a VcnConfig is present for the subscription, the provisioning package is privileged, and the VCN is not in Safe Mode. In other words, a VCN is considered active while it is connecting, fully connected, and disconnecting.

Value: 2

VCN_STATUS_CODE_INACTIVE

Added in API level 31
static val VCN_STATUS_CODE_INACTIVE: Int

Value indicating that the VCN for the subscription group is inactive.

A VCN is inactive if a VcnConfig is present for the subscription group, but the provisioning package is not privileged.

Value: 1

VCN_STATUS_CODE_NOT_CONFIGURED

Added in API level 31
static val VCN_STATUS_CODE_NOT_CONFIGURED: Int

Value indicating that the VCN for the subscription group is not configured, or that the callback is not privileged for the subscription group.

Value: 0

VCN_STATUS_CODE_SAFE_MODE

Added in API level 31
static val VCN_STATUS_CODE_SAFE_MODE: Int

Value indicating that the VCN for the subscription group is in Safe Mode.

A VCN will be put into Safe Mode if any of the gateway connections were unable to establish a connection within a system-determined timeout (while underlying networks were available).

Value: 3

Public methods

clearVcnConfig

Added in API level 31
open fun clearVcnConfig(subscriptionGroup: ParcelUuid): Unit

Clears the VCN configuration for a given subscription group.

An app that has carrier privileges for any of the subscriptions in the given group may clear a VCN configuration. This API is ONLY permitted for callers running as the primary user. Any active VCN associated with this configuration will be torn down.
Requires carrier privileges

Parameters
subscriptionGroup ParcelUuid: the subscription group that the configuration should be applied to This value cannot be null.
Exceptions
java.lang.SecurityException if the caller does not have carrier privileges, is not the owner of the associated configuration, or is not running as the primary user
java.io.IOException if the configuration failed to be cleared from disk. This may occur due to temporary disk errors, or more permanent conditions such as a full disk.

getConfiguredSubscriptionGroups

Added in API level 31
open fun getConfiguredSubscriptionGroups(): MutableList<ParcelUuid!>

Retrieves the list of Subscription Groups for which a VCN Configuration has been set.

The returned list will include only subscription groups for which an associated VcnConfig exists, and the app is either:

  • Carrier privileged for that subscription group, or
  • Is the provisioning package of the config
Return
MutableList<ParcelUuid!> This value cannot be null.
Exceptions
java.lang.SecurityException if the caller is not running as the primary user

registerVcnStatusCallback

Added in API level 31
open fun registerVcnStatusCallback(
    subscriptionGroup: ParcelUuid,
    executor: Executor,
    callback: VcnManager.VcnStatusCallback
): Unit

Registers the given callback to receive status updates for the specified subscription.

Callbacks can be registered for a subscription before VcnConfigs are set for it.

A VcnStatusCallback may only be registered for one subscription at a time. VcnStatusCallbacks may be reused once unregistered.

A VcnStatusCallback will only be invoked if the registering package has carrier privileges for the specified subscription at the time of invocation.

A VcnStatusCallback is eligible to begin receiving callbacks once it is registered and there is a VCN active for its specified subscription group (this may happen after the callback is registered).

VcnStatusCallback#onStatusChanged(int) will be invoked on registration with the current status for the specified subscription group's VCN. If the registrant is not privileged for this subscription group, VCN_STATUS_CODE_NOT_CONFIGURED will be returned.

Parameters
subscriptionGroup ParcelUuid: The subscription group to match for callbacks This value cannot be null.
executor Executor: The Executor to be used for invoking callbacks This value cannot be null.
callback VcnManager.VcnStatusCallback: The VcnStatusCallback to be registered This value cannot be null.
Exceptions
java.lang.IllegalStateException if callback is currently registered with VcnManager

setVcnConfig

Added in API level 31
open fun setVcnConfig(
    subscriptionGroup: ParcelUuid,
    config: VcnConfig
): Unit

Sets the VCN configuration for a given subscription group.

An app that has carrier privileges for any of the subscriptions in the given group may set a VCN configuration. If a configuration already exists for the given subscription group, it will be overridden. Any active VCN(s) may be forced to restart to use the new configuration.

This API is ONLY permitted for callers running as the primary user.
Requires carrier privileges

Parameters
subscriptionGroup ParcelUuid: the subscription group that the configuration should be applied to This value cannot be null.
config VcnConfig: the configuration parameters for the VCN This value cannot be null.
Exceptions
java.lang.SecurityException if the caller does not have carrier privileges for the provided subscriptionGroup, or is not running as the primary user
java.io.IOException if the configuration failed to be saved and persisted to disk. This may occur due to temporary disk errors, or more permanent conditions such as a full disk.

unregisterVcnStatusCallback

Added in API level 31
open fun unregisterVcnStatusCallback(callback: VcnManager.VcnStatusCallback): Unit

Unregisters the given callback.

Once unregistered, the callback will stop receiving status updates for the subscription it was registered with.

Parameters
callback VcnManager.VcnStatusCallback: The callback to be unregistered This value cannot be null.