TelephonyManager

ACTION_CARRIER_MESSAGING_CLIENT_SERVICE

static val ACTION_CARRIER_MESSAGING_CLIENT_SERVICE: String

A service action that identifies a android.service.carrier.CarrierMessagingClientService subclass in the AndroidManifest.xml.

See android.service.carrier.CarrierMessagingClientService for the details.

Value: "android.telephony.action.CARRIER_MESSAGING_CLIENT_SERVICE"

ACTION_CARRIER_SIGNAL_DEFAULT_NETWORK_AVAILABLE

static val ACTION_CARRIER_SIGNAL_DEFAULT_NETWORK_AVAILABLE: String

Broadcast action sent when the availability of the system default network changes.

Value: "android.telephony.action.CARRIER_SIGNAL_DEFAULT_NETWORK_AVAILABLE"

ACTION_CARRIER_SIGNAL_PCO_VALUE

static val ACTION_CARRIER_SIGNAL_PCO_VALUE: String

Broadcast action sent when a PCO value becomes available from the modem. This action is intended for sim/account status checks and only sent to the carrier apps specified in the carrier config for the subscription ID that's attached to this intent. The intent will have the following extra values:

• EXTRA_APN_TYPE
An integer indicating the apn type.
• EXTRA_APN_PROTOCOL
An integer indicating the protocol of the apn connection
• EXTRA_PCO_ID
An integer indicating the PCO id for the data.
• EXTRA_PCO_VALUE
A byte array of PCO data read from modem.
• SubscriptionManager#EXTRA_SUBSCRIPTION_INDEX
The subscription ID for which the PCO info was received.

This is a protected intent that can only be sent by the system.

Value: "android.telephony.action.CARRIER_SIGNAL_PCO_VALUE"

ACTION_CARRIER_SIGNAL_REDIRECTED

static val ACTION_CARRIER_SIGNAL_REDIRECTED: String

Broadcast action sent when a data connection is redirected with validation failure. This action is intended for sim/account status checks and only sent to the carrier apps specified in the carrier config for the subscription ID that's attached to this intent. The intent will have the following extra values:

• EXTRA_APN_TYPE
An integer indicating the apn type.
• EXTRA_REDIRECTION_URL
A string indicating the redirection url
• SubscriptionManager#EXTRA_SUBSCRIPTION_INDEX
The subscription ID on which the validation failure happened.

This is a protected intent that can only be sent by the system.

Value: "android.telephony.action.CARRIER_SIGNAL_REDIRECTED"

ACTION_CARRIER_SIGNAL_REQUEST_NETWORK_FAILED

static val ACTION_CARRIER_SIGNAL_REQUEST_NETWORK_FAILED: String

Broadcast action sent when a data connection setup fails. This action is intended for sim/account status checks and only sent to the carrier apps specified in the carrier config for the subscription ID that's attached to this intent. The intent will have the following extra values:

• EXTRA_APN_TYPE
An integer indicating the apn type.
• EXTRA_DATA_FAIL_CAUSE
A integer indicating the data fail cause.
• SubscriptionManager#EXTRA_SUBSCRIPTION_INDEX
The subscription ID on which the data setup failure happened.

This is a protected intent that can only be sent by the system.

Value: "android.telephony.action.CARRIER_SIGNAL_REQUEST_NETWORK_FAILED"

ACTION_CARRIER_SIGNAL_RESET

static val ACTION_CARRIER_SIGNAL_RESET: String

Broadcast action sent when carrier apps should reset their internal state. Sent when certain events such as turning on/off mobile data, removing the SIM, etc. require carrier apps to reset their state. This action is intended to signal carrier apps to perform cleanup operations. It is only sent to the carrier apps specified in the carrier config for the subscription ID attached to this intent. The intent will have the following extra values:

• SubscriptionManager#EXTRA_SUBSCRIPTION_INDEX
The subscription ID for which state should be reset.

This is a protected intent that can only be sent by the system.

Value: "android.telephony.action.CARRIER_SIGNAL_RESET"

ACTION_CONFIGURE_VOICEMAIL

static val ACTION_CONFIGURE_VOICEMAIL: String

Open the voicemail settings activity to make changes to voicemail configuration.

The EXTRA_PHONE_ACCOUNT_HANDLE extra indicates which PhoneAccountHandle to configure voicemail. The EXTRA_HIDE_PUBLIC_SETTINGS hides settings the dialer will modify through public API if set.

Value: "android.telephony.action.CONFIGURE_VOICEMAIL"

ACTION_MULTI_SIM_CONFIG_CHANGED

static val ACTION_MULTI_SIM_CONFIG_CHANGED: String

Broadcast action to be received by Broadcast receivers. Indicates multi-SIM configuration is changed. For example, it changed from single SIM capable to dual-SIM capable (DSDS or DSDA) or triple-SIM mode. It doesn't indicate how many subscriptions are actually active, or which states SIMs are, or that all steps during multi-SIM change are done. To know those information you still need to listen to SIM_STATE changes or active subscription changes. See extra of EXTRA_ACTIVE_SIM_SUPPORTED_COUNT for updated value.

Value: "android.telephony.action.MULTI_SIM_CONFIG_CHANGED"

ACTION_NETWORK_COUNTRY_CHANGED

static val ACTION_NETWORK_COUNTRY_CHANGED: String

Broadcast intent action for network country code changes.

The EXTRA_NETWORK_COUNTRY extra indicates the country code of the current network returned by getNetworkCountryIso().

There may be a delay of several minutes before reporting that no country is detected.

Value: "android.telephony.action.NETWORK_COUNTRY_CHANGED"

ACTION_PHONE_STATE_CHANGED

static val ACTION_PHONE_STATE_CHANGED: String

Broadcast intent action indicating that the call state on the device has changed.

The EXTRA_STATE extra indicates the new call state. If a receiving app has android.Manifest.permission#READ_CALL_LOG permission, a second extra EXTRA_INCOMING_NUMBER provides the phone number for incoming and outgoing calls as a String.

If the receiving app has android.Manifest.permission#READ_CALL_LOG and android.Manifest.permission#READ_PHONE_STATE permission, it will receive the broadcast twice; one with the EXTRA_INCOMING_NUMBER populated with the phone number, and another with it blank. Due to the nature of broadcasts, you cannot assume the order in which these broadcasts will arrive, however you are guaranteed to receive two in this case. Apps which are interested in the EXTRA_INCOMING_NUMBER can ignore the broadcasts where EXTRA_INCOMING_NUMBER is not present in the extras (e.g. where Intent#hasExtra(String) returns false).

This was a android.content.Context#sendStickyBroadcast broadcast in version 1.0, but it is no longer sticky. Instead, use getCallState to synchronously query the current call state.
Requires android.Manifest.permission#READ_PHONE_STATE

Value: "android.intent.action.PHONE_STATE"

ACTION_RESET_MOBILE_NETWORK_SETTINGS

static val ACTION_RESET_MOBILE_NETWORK_SETTINGS: String

Activity action: Show setting to reset mobile networks.

On devices with a settings activity to reset mobile networks, the activity should be launched without additional permissions.

On some devices, this settings activity may not exist. Callers should ensure that this case is appropriately handled.

Value: "android.telephony.action.RESET_MOBILE_NETWORK_SETTINGS"

ACTION_RESPOND_VIA_MESSAGE

static val ACTION_RESPOND_VIA_MESSAGE: String

The Phone app sends this intent when a user opts to respond-via-message during an incoming call. By default, the device's default SMS app consumes this message and sends a text message to the caller. A third party app can also provide this functionality by consuming this Intent with a android.app.Service and sending the message using its own messaging system.

The intent contains a URI (available from android.content.Intent#getData) describing the recipient, using either the sms:, smsto:, mms:, or mmsto: URI schema. Each of these URI schema carry the recipient information the same way: the path part of the URI contains the recipient's phone number or a comma-separated set of phone numbers if there are multiple recipients. For example, smsto:2065551234.

The intent may also contain extras for the message text (in android.content.Intent#EXTRA_TEXT) and a message subject (in android.content.Intent#EXTRA_SUBJECT).

Note: The intent-filter that consumes this Intent needs to be in a android.app.Service that requires the permission android.Manifest.permission#SEND_RESPOND_VIA_MESSAGE.

For example, the service that receives this intent can be declared in the manifest file with an intent filter like this:

<!-- Service that delivers SMS messages received from the phone "quick response" -->
  <service android:name=".HeadlessSmsSendService"
           android:permission="android.permission.SEND_RESPOND_VIA_MESSAGE"
           android:exported="true" >
    <intent-filter>
      <action android:name="android.intent.action.RESPOND_VIA_MESSAGE" />
      <category android:name="android.intent.category.DEFAULT" />
      <data android:scheme="sms" />
      <data android:scheme="smsto" />
      <data android:scheme="mms" />
      <data android:scheme="mmsto" />
    </intent-filter>
  </service>

Output: nothing.

Value: "android.intent.action.RESPOND_VIA_MESSAGE"

ACTION_SECRET_CODE

static val ACTION_SECRET_CODE: String

Broadcast Action: A debug code has been entered in the dialer.

This intent is broadcast by the system and OEM telephony apps may need to receive these broadcasts. And it requires the sender to be default dialer or has carrier privileges (see hasCarrierPrivileges).

These "secret codes" are used to activate developer menus by dialing certain codes. And they are of the form *#*#<code>#*#*. The intent will have the data URI: android_secret_code://<code>. It is possible that a manifest receiver would be woken up even if it is not currently running.

It is supposed to replace android.provider.Telephony.Sms.Intents#SECRET_CODE_ACTION in the next Android version. Before that both of these two actions will be broadcast.

Value: "android.telephony.action.SECRET_CODE"

ACTION_SHOW_VOICEMAIL_NOTIFICATION

static val ACTION_SHOW_VOICEMAIL_NOTIFICATION: String

Broadcast intent action for letting the default dialer to know to show voicemail notification.

The EXTRA_PHONE_ACCOUNT_HANDLE extra indicates which PhoneAccountHandle the voicemail is received on. The EXTRA_NOTIFICATION_COUNT extra indicates the total numbers of unheard voicemails. The EXTRA_VOICEMAIL_NUMBER extra indicates the voicemail number if available. The EXTRA_CALL_VOICEMAIL_INTENT extra is a android.app.PendingIntent that will call the voicemail number when sent. This extra will be empty if the voicemail number is not set, and EXTRA_LAUNCH_VOICEMAIL_SETTINGS_INTENT will be set instead. The EXTRA_LAUNCH_VOICEMAIL_SETTINGS_INTENT extra is a android.app.PendingIntent that will launch the voicemail settings. This extra is only available when the voicemail number is not set. The EXTRA_IS_REFRESH extra indicates whether the notification is a refresh or a new notification.

Value: "android.telephony.action.SHOW_VOICEMAIL_NOTIFICATION"

ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED

static val ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED: String

Broadcast Action: The subscription carrier identity has changed. This intent could be sent on the following events:

• Subscription absent. Carrier identity could change from a valid id to TelephonyManager#UNKNOWN_CARRIER_ID.
• Subscription loaded. Carrier identity could change from TelephonyManager#UNKNOWN_CARRIER_ID to a valid id.
• The subscription carrier is recognized after a remote update.

• EXTRA_CARRIER_ID The up-to-date carrier id of the current subscription id.
• EXTRA_CARRIER_NAME The up-to-date carrier name of the current subscription.
• EXTRA_SUBSCRIPTION_ID The subscription id associated with the changed carrier identity.

This is a protected intent that can only be sent by the system.

Value: "android.telephony.action.SUBSCRIPTION_CARRIER_IDENTITY_CHANGED"

ACTION_SUBSCRIPTION_SPECIFIC_CARRIER_IDENTITY_CHANGED

static val ACTION_SUBSCRIPTION_SPECIFIC_CARRIER_IDENTITY_CHANGED: String

Broadcast Action: The subscription specific carrier identity has changed. A specific carrier ID returns the fine-grained carrier ID of the current subscription. It can represent the fact that a carrier may be in effect an aggregation of other carriers (ie in an MVNO type scenario) where each of these specific carriers which are used to make up the actual carrier service may have different carrier configurations. A specific carrier ID could also be used, for example, in a scenario where a carrier requires different carrier configuration for different service offering such as a prepaid plan. the specific carrier ID would be used for configuration purposes, but apps wishing to know about the carrier itself should use the regular carrier ID returned by getSimCarrierId().

Similar like ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED, this intent will be sent on the event of ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED while its also possible to be sent without ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED when specific carrier ID changes while carrier ID remains the same. e.g, the same subscription switches to different IMSI could potentially change its specific carrier ID while carrier id remains the same.

Value: "android.telephony.action.SUBSCRIPTION_SPECIFIC_CARRIER_IDENTITY_CHANGED"

ALLOWED_NETWORK_TYPES_REASON_CARRIER

static val ALLOWED_NETWORK_TYPES_REASON_CARRIER: Int

To indicate allowed network type change is requested by carrier. Carrier configuration won't affect the settings configured through other reasons and will result in allowing network types that are in both configurations (i.e intersection of both sets).

Value: 2

ALLOWED_NETWORK_TYPES_REASON_USER

static val ALLOWED_NETWORK_TYPES_REASON_USER: Int

To indicate allowed network type change is requested by user.

Value: 0

APPTYPE_CSIM

static val APPTYPE_CSIM: Int

UICC application type is CSIM

Value: 4

APPTYPE_ISIM

static val APPTYPE_ISIM: Int

UICC application type is ISIM

Value: 5

APPTYPE_RUIM

static val APPTYPE_RUIM: Int

UICC application type is RUIM

Value: 3

APPTYPE_SIM

static val APPTYPE_SIM: Int

UICC application type is SIM

Value: 1

APPTYPE_UNKNOWN

static val APPTYPE_UNKNOWN: Int

UICC application type is unknown or not specified

Value: 0

APPTYPE_USIM

static val APPTYPE_USIM: Int

UICC application type is USIM

Value: 2

AUTHTYPE_EAP_AKA

static val AUTHTYPE_EAP_AKA: Int

Authentication type for UICC challenge is EAP AKA. See RFC 4187 for details.

Value: 129

AUTHTYPE_EAP_SIM

static val AUTHTYPE_EAP_SIM: Int

Authentication type for UICC challenge is EAP SIM. See RFC 4186 for details.

Value: 128

AUTHTYPE_GBA_BOOTSTRAP

static val AUTHTYPE_GBA_BOOTSTRAP: Int

Authentication type for GBA Bootstrap Challenge. Pass this authentication type into the getIccAuthentication API to perform a GBA Bootstrap challenge (BSF), with data (generated according to the procedure defined in 3GPP 33.220 Section 5.3.2 step.4) in base64 encoding. This method will return the Bootstrapping response in base64 encoding when ICC authentication is completed. Ref 3GPP 33.220 Section 5.3.2.

Value: 132

AUTHTYPE_GBA_NAF_KEY_EXTERNAL

static val AUTHTYPE_GBA_NAF_KEY_EXTERNAL: Int

Authentication type for GBA Network Application Functions (NAF) key External Challenge. Pass this authentication type into the getIccAuthentication API to perform a GBA Network Applications Functions (NAF) key External challenge using the NAF_ID parameter as the data in base64 encoding. This method will return the Ks_Ext_Naf key in base64 encoding when ICC authentication is completed. Ref 3GPP 33.220 Section 5.3.2.

Value: 133

CALL_COMPOSER_STATUS_BUSINESS_ONLY

static val CALL_COMPOSER_STATUS_BUSINESS_ONLY: Int

Call composer status Business Only from user setting.

Value: 2

CALL_COMPOSER_STATUS_OFF

static val CALL_COMPOSER_STATUS_OFF: Int

Call composer status OFF from user setting.

Value: 0

CALL_COMPOSER_STATUS_ON

static val CALL_COMPOSER_STATUS_ON: Int

Call composer status ON from user setting.

Value: 1

CALL_STATE_IDLE

static val CALL_STATE_IDLE: Int

Device call state: No activity.

Value: 0

CALL_STATE_OFFHOOK

static val CALL_STATE_OFFHOOK: Int

Device call state: Off-hook. At least one call exists that is dialing, active, or on hold, and no calls are ringing or waiting.

Value: 2

CALL_STATE_RINGING

static val CALL_STATE_RINGING: Int

Device call state: Ringing. A new call arrived and is ringing or waiting. In the latter case, another call is already active.

Value: 1

CAPABILITY_SLICING_CONFIG_SUPPORTED

static val CAPABILITY_SLICING_CONFIG_SUPPORTED: String

Indicates whether getNetworkSlicingConfiguration is supported. See comments on respective methods for more information.

Value: "CAPABILITY_SLICING_CONFIG_SUPPORTED"

CARRIER_RESTRICTION_STATUS_NOT_RESTRICTED

static val CARRIER_RESTRICTION_STATUS_NOT_RESTRICTED: Int

The device is not restricted to a carrier

Value: 1

CARRIER_RESTRICTION_STATUS_RESTRICTED

static val CARRIER_RESTRICTION_STATUS_RESTRICTED: Int

The device is restricted to a carrier.

Value: 2

CARRIER_RESTRICTION_STATUS_RESTRICTED_TO_CALLER

static val CARRIER_RESTRICTION_STATUS_RESTRICTED_TO_CALLER: Int

The device is restricted to the carrier of the calling application.

Value: 3

CARRIER_RESTRICTION_STATUS_UNKNOWN

static val CARRIER_RESTRICTION_STATUS_UNKNOWN: Int

Carrier restriction status value is unknown, in case modem did not provide any information about carrier restriction status.

Value: 0

CDMA_ROAMING_MODE_AFFILIATED

static val CDMA_ROAMING_MODE_AFFILIATED: Int

Value for CarrierConfigManager#KEY_CDMA_ROAMING_MODE_INT which permits roaming on affiliated networks.

Value: 1

CDMA_ROAMING_MODE_ANY

static val CDMA_ROAMING_MODE_ANY: Int

Value for CarrierConfigManager#KEY_CDMA_ROAMING_MODE_INT which permits roaming on any network.

Value: 2

CDMA_ROAMING_MODE_HOME

static val CDMA_ROAMING_MODE_HOME: Int

Value for CarrierConfigManager#KEY_CDMA_ROAMING_MODE_INT which only permits connections on home networks.

Value: 0

CDMA_ROAMING_MODE_RADIO_DEFAULT

static val CDMA_ROAMING_MODE_RADIO_DEFAULT: Int

Value for CarrierConfigManager#KEY_CDMA_ROAMING_MODE_INT which leaves the roaming mode set to the radio default or to the user's preference if they've indicated one.

Value: -1

DATA_ACTIVITY_DORMANT

static val DATA_ACTIVITY_DORMANT: Int

Data connection is active, but physical link is down

Value: 4

DATA_ACTIVITY_IN

static val DATA_ACTIVITY_IN: Int

Data connection activity: Currently receiving IP PPP traffic.

Value: 1

DATA_ACTIVITY_INOUT

static val DATA_ACTIVITY_INOUT: Int

Data connection activity: Currently both sending and receiving IP PPP traffic.

Value: 3

DATA_ACTIVITY_NONE

static val DATA_ACTIVITY_NONE: Int

Data connection activity: No traffic.

Value: 0

DATA_ACTIVITY_OUT

static val DATA_ACTIVITY_OUT: Int

Data connection activity: Currently sending IP PPP traffic.

Value: 2

DATA_CONNECTED

static val DATA_CONNECTED: Int

Data connection state: Connected. IP traffic should be available.

Value: 2

DATA_CONNECTING

static val DATA_CONNECTING: Int

Data connection state: Currently setting up a data connection.

Value: 1

DATA_DISCONNECTED

static val DATA_DISCONNECTED: Int

Data connection state: Disconnected. IP traffic not available.

Value: 0

DATA_DISCONNECTING

static val DATA_DISCONNECTING: Int

Data connection state: Disconnecting. IP traffic may be available but will cease working imminently.

Value: 4

DATA_ENABLED_REASON_CARRIER

static val DATA_ENABLED_REASON_CARRIER: Int

To indicate enable or disable carrier data by the system based on carrier signalling or carrier privileged apps. Carrier data on/off won't affect user settings but will bypass the settings and turns off data internally if set to false.

Value: 2

DATA_ENABLED_REASON_OVERRIDE

static val DATA_ENABLED_REASON_OVERRIDE: Int

To indicate data was enabled or disabled due to mobile data policy overrides. Note that this is not a valid reason for setDataEnabledForReason(int,boolean) and is only used to indicate that data enabled was changed due to an override.

Value: 4

DATA_ENABLED_REASON_POLICY

static val DATA_ENABLED_REASON_POLICY: Int

To indicate that data control due to policy. Usually used when data limit is passed. Policy data on/off won't affect user settings but will bypass the settings and turns off data internally if set to false.

Value: 1

DATA_ENABLED_REASON_THERMAL

static val DATA_ENABLED_REASON_THERMAL: Int

To indicate enable or disable data by thermal service. Thermal data on/off won't affect user settings but will bypass the settings and turns off data internally if set to false.

Value: 3

DATA_ENABLED_REASON_UNKNOWN

static val DATA_ENABLED_REASON_UNKNOWN: Int

To indicate that data was enabled or disabled due to an unknown reason. Note that this is not a valid reason for setDataEnabledForReason(int,boolean) and is only used to indicate that data enabled was changed.

Value: -1

DATA_ENABLED_REASON_USER

static val DATA_ENABLED_REASON_USER: Int

To indicate that user enabled or disabled data.

Value: 0

DATA_HANDOVER_IN_PROGRESS

static val DATA_HANDOVER_IN_PROGRESS: Int

Data connection state: Handover in progress. The connection is being transited from cellular network to IWLAN, or from IWLAN to cellular network.

Value: 5

DATA_SUSPENDED

static val DATA_SUSPENDED: Int

Data connection state: Suspended. The connection is up, but IP traffic is temporarily unavailable. For example, in a 2G network, data activity may be suspended when a voice call arrives.

Value: 3

DATA_UNKNOWN

static val DATA_UNKNOWN: Int

Data connection state: Unknown. Used before we know the state.

Value: -1

DEFAULT_PORT_INDEX

static val DEFAULT_PORT_INDEX: Int

Default port index for a UICC. On physical SIM cards the only available port is 0. See android.telephony.UiccPortInfo for more information on ports. See android.telephony.euicc.EuiccManager#isSimPortAvailable(int) for information on how portIndex is used on eUICCs.

Value: 0

ERI_FLASH

static val ERI_FLASH: Int

ERI (Enhanced Roaming Indicator) is FLASH i.e value 2 defined by 3GPP2 C.R1001-H v1.0 Table 8.1-1.

Value: 2

ERI_OFF

static val ERI_OFF: Int

ERI (Enhanced Roaming Indicator) is OFF i.e value 1 defined by 3GPP2 C.R1001-H v1.0 Table 8.1-1.

Value: 1

ERI_ON

static val ERI_ON: Int

ERI (Enhanced Roaming Indicator) is ON i.e value 0 defined by 3GPP2 C.R1001-H v1.0 Table 8.1-1.

Value: 0

EVENT_DISPLAY_EMERGENCY_MESSAGE

static val EVENT_DISPLAY_EMERGENCY_MESSAGE: String

Event reported from the Telephony stack to indicate that the Connection is not able to find any network and likely will not get connected. Upon receiving this event, the dialer app should start the app included in the extras bundle of this event if satellite is provisioned.

The dialer app receives this event via Call.Callback#onConnectionEvent(Call, String, Bundle).

The Bundle parameter is guaranteed to include the following extras if the below conditions are met:

• EXTRA_EMERGENCY_CALL_TO_SATELLITE_HANDOVER_TYPE - the recommending handover type.
• EXTRA_EMERGENCY_CALL_TO_SATELLITE_LAUNCH_INTENT - the PendingIntent which will be launched by the Dialer app when receiving this connection event.

If the device is connected to satellite via carrier within the hysteresis time defined by the carrier config CarrierConfigManager#KEY_SATELLITE_CONNECTION_HYSTERESIS_SEC_INT, the component of the EXTRA_EMERGENCY_CALL_TO_SATELLITE_LAUNCH_INTENT will be set to the default SMS app.

Otherwise, if the overlay config config_oem_enabled_satellite_handover_app is present, the app defined by this config will be used as the component of the EXTRA_EMERGENCY_CALL_TO_SATELLITE_LAUNCH_INTENT. If this overlay config is empty, EXTRA_EMERGENCY_CALL_TO_SATELLITE_LAUNCH_INTENT will not be included in the event EVENT_DISPLAY_EMERGENCY_MESSAGE.

Value: "android.telephony.event.DISPLAY_EMERGENCY_MESSAGE"

EXTRA_ACTIVE_SIM_SUPPORTED_COUNT

static val EXTRA_ACTIVE_SIM_SUPPORTED_COUNT: String

The number of active SIM supported by current multi-SIM config. It's not related to how many SIM/subscriptions are currently active. Same value will be returned by getActiveModemCount(). For single SIM mode, it's 1. For DSDS or DSDA mode, it's 2. For triple-SIM mode, it's 3. Extra of ACTION_MULTI_SIM_CONFIG_CHANGED. type: integer

Value: "android.telephony.extra.ACTIVE_SIM_SUPPORTED_COUNT"

EXTRA_APN_PROTOCOL

static val EXTRA_APN_PROTOCOL: String

An integer extra containing the protocol of the apn connection. Sent with the ACTION_CARRIER_SIGNAL_PCO_VALUE broadcast. See the PROTOCOL_* constants in ApnSetting for a list of possible values.

Value: "android.telephony.extra.APN_PROTOCOL"

EXTRA_APN_TYPE

static val EXTRA_APN_TYPE: String

An integer extra containing the APN type. Sent with the ACTION_CARRIER_SIGNAL_REQUEST_NETWORK_FAILED, ACTION_CARRIER_SIGNAL_REDIRECTED, and ACTION_CARRIER_SIGNAL_PCO_VALUE broadcasts. See the TYPE_ constants in ApnSetting for a list of possible values.

Value: "android.telephony.extra.APN_TYPE"

EXTRA_CALL_VOICEMAIL_INTENT

static val EXTRA_CALL_VOICEMAIL_INTENT: String

The intent to call voicemail.

Value: "android.telephony.extra.CALL_VOICEMAIL_INTENT"

EXTRA_CARRIER_ID

static val EXTRA_CARRIER_ID: String

An int extra used with ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED which indicates the updated carrier id returned by TelephonyManager#getSimCarrierId().

Will be TelephonyManager#UNKNOWN_CARRIER_ID if the subscription is unavailable or the carrier cannot be identified.

Value: "android.telephony.extra.CARRIER_ID"

EXTRA_CARRIER_NAME

static val EXTRA_CARRIER_NAME: String

An string extra used with ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED which indicates the updated carrier name of the current subscription.

Value: "android.telephony.extra.CARRIER_NAME"

EXTRA_DATA_FAIL_CAUSE

static val EXTRA_DATA_FAIL_CAUSE: String

An integer extra containing the data fail cause. Sent with ACTION_CARRIER_SIGNAL_REQUEST_NETWORK_FAILED. See DataFailCause for a list of possible values.

Value: "android.telephony.extra.DATA_FAIL_CAUSE"

EXTRA_DEFAULT_NETWORK_AVAILABLE

static val EXTRA_DEFAULT_NETWORK_AVAILABLE: String

A boolean extra indicating the availability of the default network. Sent with the ACTION_CARRIER_SIGNAL_DEFAULT_NETWORK_AVAILABLE broadcast.

Value: "android.telephony.extra.DEFAULT_NETWORK_AVAILABLE"

EXTRA_EMERGENCY_CALL_TO_SATELLITE_HANDOVER_TYPE

static val EXTRA_EMERGENCY_CALL_TO_SATELLITE_HANDOVER_TYPE: String

Integer extra key used with EVENT_DISPLAY_EMERGENCY_MESSAGE which indicates the type of handover from emergency call to satellite messaging.

Will be either android.telephony.satellite.SatelliteManager#EMERGENCY_CALL_TO_SATELLITE_HANDOVER_TYPE_SOS or android.telephony.satellite.SatelliteManager#EMERGENCY_CALL_TO_SATELLITE_HANDOVER_TYPE_T911

Set in the extras for the EVENT_DISPLAY_EMERGENCY_MESSAGE connection event.

Value: "android.telephony.extra.EMERGENCY_CALL_TO_SATELLITE_HANDOVER_TYPE"

EXTRA_EMERGENCY_CALL_TO_SATELLITE_LAUNCH_INTENT

static val EXTRA_EMERGENCY_CALL_TO_SATELLITE_LAUNCH_INTENT: String

Extra key used with the EVENT_DISPLAY_EMERGENCY_MESSAGE for a PendingIntent which will be launched by the Dialer app.

Value: "android.telephony.extra.EMERGENCY_CALL_TO_SATELLITE_LAUNCH_INTENT"

EXTRA_HIDE_PUBLIC_SETTINGS

static val EXTRA_HIDE_PUBLIC_SETTINGS: String

The boolean value indicating whether the voicemail settings activity launched by ACTION_CONFIGURE_VOICEMAIL should hide settings accessible through public API. This is used by dialer implementations which provides their own voicemail settings UI, but still needs to expose device specific voicemail settings to the user.

Value: "android.telephony.extra.HIDE_PUBLIC_SETTINGS"

EXTRA_INCOMING_NUMBER

static val EXTRA_INCOMING_NUMBER: String

Deprecated: Companion apps for wearable devices should use the InCallService API to retrieve the phone number for calls instead. Apps performing call screening should use the CallScreeningService API instead.

Extra key used with the ACTION_PHONE_STATE_CHANGED broadcast for a String containing the incoming or outgoing phone number.

This extra is only populated for receivers of the ACTION_PHONE_STATE_CHANGED broadcast which have been granted the android.Manifest.permission#READ_CALL_LOG and android.Manifest.permission#READ_PHONE_STATE permissions.

For incoming calls, the phone number is only guaranteed to be populated when the EXTRA_STATE changes from EXTRA_STATE_IDLE to EXTRA_STATE_RINGING. If the incoming caller is from an unknown number, the extra will be populated with an empty string. For outgoing calls, the phone number is only guaranteed to be populated when the EXTRA_STATE changes from EXTRA_STATE_IDLE to EXTRA_STATE_OFFHOOK.

Retrieve with android.content.Intent#getStringExtra(String).

Value: "incoming_number"

EXTRA_IS_REFRESH

static val EXTRA_IS_REFRESH: String

Boolean value representing whether the android.telephony.TelephonyManager#ACTION_SHOW_VOICEMAIL_NOTIFICATION is new or a refresh of an existing notification. Notification refresh happens after reboot or connectivity changes. The user has already been notified for the voicemail so it should not alert the user, and should not be shown again if the user has dismissed it.

Value: "android.telephony.extra.IS_REFRESH"

EXTRA_LAST_KNOWN_NETWORK_COUNTRY

static val EXTRA_LAST_KNOWN_NETWORK_COUNTRY: String

The extra used with an ACTION_NETWORK_COUNTRY_CHANGED to specify the last known the country code in ISO-3166-1 alpha-2 format. This might be an empty string when the country code was never available. The last known country code persists across reboot.

Retrieve with android.content.Intent#getStringExtra(String).

Value: "android.telephony.extra.LAST_KNOWN_NETWORK_COUNTRY"

EXTRA_LAUNCH_VOICEMAIL_SETTINGS_INTENT

static val EXTRA_LAUNCH_VOICEMAIL_SETTINGS_INTENT: String

The intent to launch voicemail settings.

Value: "android.telephony.extra.LAUNCH_VOICEMAIL_SETTINGS_INTENT"

EXTRA_NETWORK_COUNTRY

static val EXTRA_NETWORK_COUNTRY: String

The extra used with an ACTION_NETWORK_COUNTRY_CHANGED to specify the the country code in ISO-3166-1 alpha-2 format. This is the same country code returned by getNetworkCountryIso(). This might be an empty string when the country code is not available.

Retrieve with android.content.Intent#getStringExtra(String).

Value: "android.telephony.extra.NETWORK_COUNTRY"

EXTRA_NOTIFICATION_COUNT

static val EXTRA_NOTIFICATION_COUNT: String

The number of voice messages associated with the notification.

Value: "android.telephony.extra.NOTIFICATION_COUNT"

EXTRA_PCO_ID

static val EXTRA_PCO_ID: String

An integer extra indicating the ID for the PCO data. Sent with the ACTION_CARRIER_SIGNAL_PCO_VALUE broadcast.

Value: "android.telephony.extra.PCO_ID"

EXTRA_PCO_VALUE

static val EXTRA_PCO_VALUE: String

A byte array extra containing PCO data read from the modem. Sent with the ACTION_CARRIER_SIGNAL_PCO_VALUE broadcast.

Value: "android.telephony.extra.PCO_VALUE"

EXTRA_PHONE_ACCOUNT_HANDLE

static val EXTRA_PHONE_ACCOUNT_HANDLE: String

The extra used with an ACTION_CONFIGURE_VOICEMAIL and ACTION_SHOW_VOICEMAIL_NOTIFICATION Intent to specify the PhoneAccountHandle the configuration or notification is for.

Retrieve with android.content.Intent#getParcelableExtra(String).

Value: "android.telephony.extra.PHONE_ACCOUNT_HANDLE"

EXTRA_REDIRECTION_URL

static val EXTRA_REDIRECTION_URL: String

String extra containing the redirection URL sent with ACTION_CARRIER_SIGNAL_REDIRECTED.

Value: "android.telephony.extra.REDIRECTION_URL"

EXTRA_SPECIFIC_CARRIER_ID

static val EXTRA_SPECIFIC_CARRIER_ID: String

An int extra used with ACTION_SUBSCRIPTION_SPECIFIC_CARRIER_IDENTITY_CHANGED which indicates the updated specific carrier id returned by TelephonyManager#getSimSpecificCarrierId(). Note, its possible specific carrier id changes while ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED remains the same e.g, when subscription switch to different IMSIs.

Will be TelephonyManager#UNKNOWN_CARRIER_ID if the subscription is unavailable or the carrier cannot be identified.

Value: "android.telephony.extra.SPECIFIC_CARRIER_ID"

EXTRA_SPECIFIC_CARRIER_NAME

static val EXTRA_SPECIFIC_CARRIER_NAME: String

An string extra used with ACTION_SUBSCRIPTION_SPECIFIC_CARRIER_IDENTITY_CHANGED which indicates the updated specific carrier name returned by TelephonyManager#getSimSpecificCarrierIdName().

it's a user-facing name of the specific carrier id EXTRA_SPECIFIC_CARRIER_ID e.g, Tracfone-AT&T

Value: "android.telephony.extra.SPECIFIC_CARRIER_NAME"

EXTRA_STATE

static val EXTRA_STATE: String

The lookup key used with the ACTION_PHONE_STATE_CHANGED broadcast for a String containing the new call state.

Retrieve with android.content.Intent#getStringExtra(String).

Value: "state"

EXTRA_SUBSCRIPTION_ID

static val EXTRA_SUBSCRIPTION_ID: String

An int extra used with ACTION_SUBSCRIPTION_CARRIER_IDENTITY_CHANGED to indicate the subscription which has changed; or in general whenever a subscription ID needs specified.

Value: "android.telephony.extra.SUBSCRIPTION_ID"

EXTRA_VOICEMAIL_NUMBER

static val EXTRA_VOICEMAIL_NUMBER: String

The voicemail number.

Value: "android.telephony.extra.VOICEMAIL_NUMBER"

INCLUDE_LOCATION_DATA_COARSE

static val INCLUDE_LOCATION_DATA_COARSE: Int

Include coarse location data. Indicates whether the caller would not like to receive location related information which will be sent if the caller already possess android.Manifest.permission#ACCESS_COARSE_LOCATION and do not renounce the permissions.

Value: 1

INCLUDE_LOCATION_DATA_FINE

static val INCLUDE_LOCATION_DATA_FINE: Int

Include fine location data. Indicates whether the caller would not like to receive location related information which will be sent if the caller already possess android.Manifest.permission#ACCESS_FINE_LOCATION and do not renounce the permissions.

Value: 2

INCLUDE_LOCATION_DATA_NONE

static val INCLUDE_LOCATION_DATA_NONE: Int

Specifies to not include any location related data. Indicates whether the caller would not like to receive location related information which will be sent if the caller already possess android.Manifest.permission#ACCESS_COARSE_LOCATION and do not renounce the permissions.

Value: 0

METADATA_HIDE_VOICEMAIL_SETTINGS_MENU

static val METADATA_HIDE_VOICEMAIL_SETTINGS_MENU: String

A boolean meta-data value indicating whether the voicemail settings should be hidden in the call settings page launched by android.telecom.TelecomManager#ACTION_SHOW_CALL_SETTINGS. Dialer implementations (see android.telecom.TelecomManager#getDefaultDialerPackage()) which would also like to manage voicemail settings should set this meta-data to true in the manifest registration of their application.

Value: "android.telephony.HIDE_VOICEMAIL_SETTINGS_MENU"

MULTISIM_ALLOWED

static val MULTISIM_ALLOWED: Int

The usage of multiple SIM cards at the same time to register on the network (e.g. Dual Standby or Dual Active) is supported.

Value: 0

MULTISIM_NOT_SUPPORTED_BY_CARRIER

static val MULTISIM_NOT_SUPPORTED_BY_CARRIER: Int

The usage of multiple SIM cards at the same time to register on the network (e.g. Dual Standby or Dual Active) is supported by the hardware, but restricted by the carrier.

Value: 2

MULTISIM_NOT_SUPPORTED_BY_HARDWARE

static val MULTISIM_NOT_SUPPORTED_BY_HARDWARE: Int

The usage of multiple SIM cards at the same time to register on the network (e.g. Dual Standby or Dual Active) is not supported by the hardware.

Value: 1

NETWORK_SELECTION_MODE_AUTO

static val NETWORK_SELECTION_MODE_AUTO: Int

Value: 1

NETWORK_SELECTION_MODE_MANUAL

static val NETWORK_SELECTION_MODE_MANUAL: Int

Value: 2

NETWORK_SELECTION_MODE_UNKNOWN

static val NETWORK_SELECTION_MODE_UNKNOWN: Int

Value: 0

NETWORK_TYPE_1xRTT

static val NETWORK_TYPE_1xRTT: Int

Current network is 1xRTT

Value: 7

NETWORK_TYPE_BITMASK_1xRTT

static val NETWORK_TYPE_BITMASK_1xRTT: Long

network type bitmask indicating the support of radio tech 1xRTT.

Value: 64L

NETWORK_TYPE_BITMASK_CDMA

static val NETWORK_TYPE_BITMASK_CDMA: Long

network type bitmask indicating the support of radio tech CDMA(IS95A/IS95B).

Value: 8L

NETWORK_TYPE_BITMASK_EDGE

static val NETWORK_TYPE_BITMASK_EDGE: Long

network type bitmask indicating the support of radio tech EDGE.

Value: 2L

NETWORK_TYPE_BITMASK_EHRPD

static val NETWORK_TYPE_BITMASK_EHRPD: Long

network type bitmask indicating the support of radio tech EHRPD.

Value: 8192L

NETWORK_TYPE_BITMASK_EVDO_0

static val NETWORK_TYPE_BITMASK_EVDO_0: Long

network type bitmask indicating the support of radio tech EVDO 0.

Value: 16L

NETWORK_TYPE_BITMASK_EVDO_A

static val NETWORK_TYPE_BITMASK_EVDO_A: Long

network type bitmask indicating the support of radio tech EVDO A.

Value: 32L

NETWORK_TYPE_BITMASK_EVDO_B

static val NETWORK_TYPE_BITMASK_EVDO_B: Long

network type bitmask indicating the support of radio tech EVDO B.

Value: 2048L

NETWORK_TYPE_BITMASK_GPRS

static val NETWORK_TYPE_BITMASK_GPRS: Long

network type bitmask indicating the support of radio tech GPRS.

Value: 1L

NETWORK_TYPE_BITMASK_GSM

static val NETWORK_TYPE_BITMASK_GSM: Long

network type bitmask indicating the support of radio tech GSM.

Value: 32768L

NETWORK_TYPE_BITMASK_HSDPA

static val NETWORK_TYPE_BITMASK_HSDPA: Long

network type bitmask indicating the support of radio tech HSDPA.

Value: 128L

NETWORK_TYPE_BITMASK_HSPA

static val NETWORK_TYPE_BITMASK_HSPA: Long

network type bitmask indicating the support of radio tech HSPA.

Value: 512L

NETWORK_TYPE_BITMASK_HSPAP

static val NETWORK_TYPE_BITMASK_HSPAP: Long

network type bitmask indicating the support of radio tech HSPAP.

Value: 16384L

NETWORK_TYPE_BITMASK_HSUPA

static val NETWORK_TYPE_BITMASK_HSUPA: Long

network type bitmask indicating the support of radio tech HSUPA.

Value: 256L

NETWORK_TYPE_BITMASK_IWLAN

static val NETWORK_TYPE_BITMASK_IWLAN: Long

network type bitmask indicating the support of radio tech IWLAN.

Value: 131072L

NETWORK_TYPE_BITMASK_LTE

static val NETWORK_TYPE_BITMASK_LTE: Long

network type bitmask indicating the support of radio tech LTE.

Value: 4096L

NETWORK_TYPE_BITMASK_LTE_CA

static val NETWORK_TYPE_BITMASK_LTE_CA: Long

Deprecated: Please use NETWORK_TYPE_BITMASK_LTE instead. Deprecated in Android U.

NOT USED; this bitmask is exposed accidentally. If used, will be converted to NETWORK_TYPE_BITMASK_LTE. network type bitmask indicating the support of radio tech LTE CA (carrier aggregation).

Value: 262144L

NETWORK_TYPE_BITMASK_NR

static val NETWORK_TYPE_BITMASK_NR: Long

network type bitmask indicating the support of radio tech NR(New Radio) 5G.

Value: 524288L

NETWORK_TYPE_BITMASK_TD_SCDMA

static val NETWORK_TYPE_BITMASK_TD_SCDMA: Long

network type bitmask indicating the support of radio tech TD_SCDMA.

Value: 65536L

NETWORK_TYPE_BITMASK_UMTS

static val NETWORK_TYPE_BITMASK_UMTS: Long

network type bitmask indicating the support of radio tech UMTS.

Value: 4L

NETWORK_TYPE_BITMASK_UNKNOWN

static val NETWORK_TYPE_BITMASK_UNKNOWN: Long

network type bitmask unknown.

Value: 0L

NETWORK_TYPE_CDMA

static val NETWORK_TYPE_CDMA: Int

Current network is CDMA: Either IS95A or IS95B

Value: 4

NETWORK_TYPE_EDGE

static val NETWORK_TYPE_EDGE: Int

Current network is EDGE

Value: 2

NETWORK_TYPE_EHRPD

static val NETWORK_TYPE_EHRPD: Int

Current network is eHRPD

Value: 14

NETWORK_TYPE_EVDO_0

static val NETWORK_TYPE_EVDO_0: Int

Current network is EVDO revision 0

Value: 5

NETWORK_TYPE_EVDO_A

static val NETWORK_TYPE_EVDO_A: Int

Current network is EVDO revision A

Value: 6

NETWORK_TYPE_EVDO_B

static val NETWORK_TYPE_EVDO_B: Int

Current network is EVDO revision B

Value: 12

NETWORK_TYPE_GPRS

static val NETWORK_TYPE_GPRS: Int

Current network is GPRS

Value: 1

NETWORK_TYPE_GSM

static val NETWORK_TYPE_GSM: Int

Current network is GSM

Value: 16

NETWORK_TYPE_HSDPA

static val NETWORK_TYPE_HSDPA: Int

Current network is HSDPA

Value: 8

NETWORK_TYPE_HSPA

static val NETWORK_TYPE_HSPA: Int

Current network is HSPA

Value: 10

NETWORK_TYPE_HSPAP

static val NETWORK_TYPE_HSPAP: Int

Current network is HSPA+

Value: 15

NETWORK_TYPE_HSUPA

static val NETWORK_TYPE_HSUPA: Int

Current network is HSUPA

Value: 9

NETWORK_TYPE_IDEN

static val NETWORK_TYPE_IDEN: Int

Deprecated: Legacy network type no longer being used starting in Android U.

Current network is iDen

Value: 11

NETWORK_TYPE_IWLAN

static val NETWORK_TYPE_IWLAN: Int

Current network is IWLAN

Value: 18

NETWORK_TYPE_LTE

static val NETWORK_TYPE_LTE: Int

Current network is LTE

Value: 13

NETWORK_TYPE_NR

static val NETWORK_TYPE_NR: Int

Current network is NR (New Radio) 5G. This will only be returned for 5G SA. For 5G NSA, the network type will be NETWORK_TYPE_LTE.

Value: 20

NETWORK_TYPE_TD_SCDMA

static val NETWORK_TYPE_TD_SCDMA: Int

Current network is TD_SCDMA

Value: 17

NETWORK_TYPE_UMTS

static val NETWORK_TYPE_UMTS: Int

Current network is UMTS

Value: 3

NETWORK_TYPE_UNKNOWN

static val NETWORK_TYPE_UNKNOWN: Int

Network type is unknown

Value: 0

PHONE_TYPE_CDMA

static val PHONE_TYPE_CDMA: Int

Phone radio is CDMA.

Value: 2

PHONE_TYPE_GSM

static val PHONE_TYPE_GSM: Int

Phone radio is GSM.

Value: 1

PHONE_TYPE_NONE

static val PHONE_TYPE_NONE: Int

No phone radio.

Value: 0

PHONE_TYPE_SIP

static val PHONE_TYPE_SIP: Int

Phone is via SIP.

Value: 3

PREMIUM_CAPABILITY_PRIORITIZE_LATENCY

static val PREMIUM_CAPABILITY_PRIORITIZE_LATENCY: Int

A premium capability that boosts the network to allow for real-time interactive traffic by prioritizing low latency communication. Corresponds to NetworkCapabilities#NET_CAPABILITY_PRIORITIZE_LATENCY.

Value: 34

PURCHASE_PREMIUM_CAPABILITY_RESULT_ALREADY_IN_PROGRESS

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_ALREADY_IN_PROGRESS: Int

Purchase premium capability failed because a request was already made and is in progress. This may have been requested by either the same app or another app. Subsequent attempts will return the same error until the previous request completes.

Value: 4

PURCHASE_PREMIUM_CAPABILITY_RESULT_ALREADY_PURCHASED

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_ALREADY_PURCHASED: Int

Purchase premium capability failed because it is already purchased and available. Subsequent attempts will return the same error until the performance boost expires.

Value: 3

PURCHASE_PREMIUM_CAPABILITY_RESULT_CARRIER_DISABLED

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_CARRIER_DISABLED: Int

Purchase premium capability failed because the carrier disabled or does not support the capability, as specified in CarrierConfigManager#KEY_SUPPORTED_PREMIUM_CAPABILITIES_INT_ARRAY. Subsequent attempts will return the same error until the carrier enables the feature.

Value: 7

PURCHASE_PREMIUM_CAPABILITY_RESULT_CARRIER_ERROR

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_CARRIER_ERROR: Int

Purchase premium capability failed because the carrier app did not indicate success. Subsequent attempts will be throttled for the amount of time specified by KEY_PREMIUM_CAPABILITY_PURCHASE_CONDITION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG and return PURCHASE_PREMIUM_CAPABILITY_RESULT_THROTTLED.

Value: 8

PURCHASE_PREMIUM_CAPABILITY_RESULT_ENTITLEMENT_CHECK_FAILED

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_ENTITLEMENT_CHECK_FAILED: Int

Purchase premium capability failed because the entitlement check failed. Subsequent attempts will be throttled for the amount of time specified by KEY_PREMIUM_CAPABILITY_PURCHASE_CONDITION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG and return PURCHASE_PREMIUM_CAPABILITY_RESULT_THROTTLED. Throttling will be reevaluated when the network is no longer congested.

Value: 13

PURCHASE_PREMIUM_CAPABILITY_RESULT_FEATURE_NOT_SUPPORTED

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_FEATURE_NOT_SUPPORTED: Int

Purchase premium capability failed because the device does not support the feature. Subsequent attempts will return the same error.

Value: 10

PURCHASE_PREMIUM_CAPABILITY_RESULT_NETWORK_NOT_AVAILABLE

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_NETWORK_NOT_AVAILABLE: Int

Purchase premium capability failed because the network is not available. Subsequent attempts will return the same error until network conditions change.

Value: 12

PURCHASE_PREMIUM_CAPABILITY_RESULT_NOT_DEFAULT_DATA_SUBSCRIPTION

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_NOT_DEFAULT_DATA_SUBSCRIPTION: Int

Purchase premium capability failed because the request was not made on the default data subscription, indicated by SubscriptionManager#getDefaultDataSubscriptionId(). Subsequent attempts will return the same error until the request is made on the default data subscription.

Value: 14

PURCHASE_PREMIUM_CAPABILITY_RESULT_NOT_FOREGROUND

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_NOT_FOREGROUND: Int

Purchase premium capability failed because the requesting application is not in the foreground. Subsequent attempts will return the same error until the requesting application moves to the foreground.

Value: 5

PURCHASE_PREMIUM_CAPABILITY_RESULT_PENDING_NETWORK_SETUP

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_PENDING_NETWORK_SETUP: Int

Purchase premium capability was successful and is waiting for the network to setup the slicing configuration. If the setup is complete within the time specified by CarrierConfigManager#KEY_PREMIUM_CAPABILITY_NETWORK_SETUP_TIME_MILLIS_LONG, subsequent requests will return PURCHASE_PREMIUM_CAPABILITY_RESULT_ALREADY_PURCHASED until the purchase expires. If the setup is not complete within the time specified above, applications can request the premium capability again.

Value: 15

PURCHASE_PREMIUM_CAPABILITY_RESULT_REQUEST_FAILED

static val PURCHASE_PREMIUM_CAPABILITY_RESULT_REQUEST_FAILED: Int