ChronoLocalDateTime

adjustInto

public Temporal adjustInto (Temporal temporal)

Adjusts the specified temporal object to have the same date and time as this object.

This returns a temporal object of the same observable type as the input with the date and time changed to be the same as this.

The adjustment is equivalent to using Temporal.with(TemporalField, long) twice, passing ChronoField.EPOCH_DAY and ChronoField.NANO_OF_DAY as the fields.

In most cases, it is clearer to reverse the calling pattern by using Temporal.with(TemporalAdjuster):

   // these two lines are equivalent, but the second approach is recommended
   temporal = thisLocalDateTime.adjustInto(temporal);
   temporal = temporal.with(thisLocalDateTime);
 

This instance is immutable and unaffected by this method call.

atZone

public abstract ChronoZonedDateTime<D> atZone (ZoneId zone)

Combines this time with a time-zone to create a ChronoZonedDateTime.

This returns a ChronoZonedDateTime formed from this date-time at the specified time-zone. The result will match this date-time as closely as possible. Time-zone rules, such as daylight savings, mean that not every local date-time is valid for the specified zone, thus the local date-time may be adjusted.

The local date-time is resolved to a single instant on the time-line. This is achieved by finding a valid offset from UTC/Greenwich for the local date-time as defined by the rules of the zone ID.

In most cases, there is only one valid offset for a local date-time. In the case of an overlap, where clocks are set back, there are two valid offsets. This method uses the earlier offset typically corresponding to "summer".

In the case of a gap, where clocks jump forward, there is no valid offset. Instead, the local date-time is adjusted to be later by the length of the gap. For a typical one hour daylight savings change, the local date-time will be moved one hour later into the offset typically corresponding to "summer".

To obtain the later offset during an overlap, call ChronoZonedDateTime.withLaterOffsetAtOverlap() on the result of this method.

compareTo

public int compareTo (ChronoLocalDateTime<?> other)

Compares this date-time to another date-time, including the chronology.

The comparison is based first on the underlying time-line date-time, then on the chronology. It is "consistent with equals", as defined by Comparable.

For example, the following is the comparator order:

1. 2012-12-03T12:00 (ISO)
2. 2012-12-04T12:00 (ISO)
3. 2555-12-04T12:00 (ThaiBuddhist)
4. 2012-12-05T12:00 (ISO)

If all the date-time objects being compared are in the same chronology, then the additional chronology stage is not required and only the local date-time is used.

This default implementation performs the comparison defined above.

equals

public abstract boolean equals (Object obj)

Checks if this date-time is equal to another date-time, including the chronology.

Compares this date-time with another ensuring that the date-time and chronology are the same.

format

public String format (DateTimeFormatter formatter)

Formats this date-time using the specified formatter.

This date-time will be passed to the formatter to produce a string.

The default implementation must behave as follows:

  return formatter.format(this);
 

from

public static ChronoLocalDateTime<?> from (TemporalAccessor temporal)

Obtains an instance of ChronoLocalDateTime from a temporal object.

This obtains a local date-time based on the specified temporal. A TemporalAccessor represents an arbitrary set of date and time information, which this factory converts to an instance of ChronoLocalDateTime.

The conversion extracts and combines the chronology and the date-time from the temporal object. The behavior is equivalent to using Chronology.localDateTime(TemporalAccessor) with the extracted chronology. Implementations are permitted to perform optimizations such as accessing those fields that are equivalent to the relevant objects.

This method matches the signature of the functional interface TemporalQuery allowing it to be used as a query via method reference, ChronoLocalDateTime::from.

getChronology

public Chronology getChronology ()

Gets the chronology of this date-time.

The Chronology represents the calendar system in use. The era and other fields in ChronoField are defined by the chronology.

hashCode

public abstract int hashCode ()

A hash code for this date-time.

isAfter

public boolean isAfter (ChronoLocalDateTime<?> other)

Checks if this date-time is after the specified date-time ignoring the chronology.

This method differs from the comparison in Comparable.compareTo(T) in that it only compares the underlying date-time and not the chronology. This allows dates in different calendar systems to be compared based on the time-line position.

This default implementation performs the comparison based on the epoch-day and nano-of-day.

isBefore

public boolean isBefore (ChronoLocalDateTime<?> other)

Checks if this date-time is before the specified date-time ignoring the chronology.

This method differs from the comparison in Comparable.compareTo(T) in that it only compares the underlying date-time and not the chronology. This allows dates in different calendar systems to be compared based on the time-line position.

This default implementation performs the comparison based on the epoch-day and nano-of-day.

isEqual

public boolean isEqual (ChronoLocalDateTime<?> other)

Checks if this date-time is equal to the specified date-time ignoring the chronology.

This method differs from the comparison in Comparable.compareTo(T) in that it only compares the underlying date and time and not the chronology. This allows date-times in different calendar systems to be compared based on the time-line position.

This default implementation performs the comparison based on the epoch-day and nano-of-day.

isSupported

public boolean isSupported (TemporalUnit unit)

Checks if the specified unit is supported.

This checks if the specified unit can be added to or subtracted from this date-time. If false, then calling the plus(long, java.time.temporal.TemporalUnit) and minus methods will throw an exception.

The set of supported units is defined by the chronology and normally includes all ChronoUnit units except FOREVER.

If the unit is not a ChronoUnit, then the result of this method is obtained by invoking TemporalUnit.isSupportedBy(Temporal) passing this as the argument. Whether the unit is supported is determined by the unit.

isSupported

public abstract boolean isSupported (TemporalField field)

Checks if the specified field is supported.

This checks if the specified field can be queried on this date-time. If false, then calling the range, get and with(java.time.temporal.TemporalField, long) methods will throw an exception.

The set of supported fields is defined by the chronology and normally includes all ChronoField date and time fields.

If the field is not a ChronoField, then the result of this method is obtained by invoking TemporalField.isSupportedBy(TemporalAccessor) passing this as the argument. Whether the field is supported is determined by the field.

minus

public ChronoLocalDateTime<D> minus (TemporalAmount amount)

Returns an object of the same type as this object with an amount subtracted.

This adjusts this temporal, subtracting according to the rules of the specified amount. The amount is typically a Period but may be any other type implementing the TemporalAmount interface, such as Duration.

Some example code indicating how and why this method is used:

  date = date.minus(period);               // subtract a Period instance
  date = date.minus(duration);             // subtract a Duration instance
  date = date.minus(workingDays(6));       // example user-written workingDays method
 

Note that calling plus followed by minus is not guaranteed to return the same date-time.

minus

public ChronoLocalDateTime<D> minus (long amountToSubtract, 
                TemporalUnit unit)

Returns an object of the same type as this object with the specified period subtracted.

This method returns a new object based on this one with the specified period subtracted. For example, on a LocalDate, this could be used to subtract a number of years, months or days. The returned object will have the same observable type as this object.

In some cases, changing a field is not fully defined. For example, if the target object is a date representing the 31st March, then subtracting one month would be unclear. In cases like this, the field is responsible for resolving the result. Typically it will choose the previous valid date, which would be the last valid day of February in this example.

plus

public ChronoLocalDateTime<D> plus (TemporalAmount amount)

Returns an object of the same type as this object with an amount added.

This adjusts this temporal, adding according to the rules of the specified amount. The amount is typically a Period but may be any other type implementing the TemporalAmount interface, such as Duration.

Some example code indicating how and why this method is used:

  date = date.plus(period);                // add a Period instance
  date = date.plus(duration);              // add a Duration instance
  date = date.plus(workingDays(6));        // example user-written workingDays method
 

Note that calling plus followed by minus is not guaranteed to return the same date-time.

plus

public abstract ChronoLocalDateTime<D> plus (long amountToAdd, 
                TemporalUnit unit)

Returns an object of the same type as this object with the specified period added.

This method returns a new object based on this one with the specified period added. For example, on a LocalDate, this could be used to add a number of years, months or days. The returned object will have the same observable type as this object.

In some cases, changing a field is not fully defined. For example, if the target object is a date representing the 31st January, then adding one month would be unclear. In cases like this, the field is responsible for resolving the result. Typically it will choose the previous valid date, which would be the last valid day of February in this example.

query

public R query (TemporalQuery<R> query)

Queries this date-time using the specified query.

This queries this date-time using the specified query strategy object. The TemporalQuery object defines the logic to be used to obtain the result. Read the documentation of the query to understand what the result of this method will be.

The result of this method is obtained by invoking the TemporalQuery.queryFrom(TemporalAccessor) method on the specified query passing this as the argument.

timeLineOrder

public static Comparator<ChronoLocalDateTime<?>> timeLineOrder ()

Gets a comparator that compares ChronoLocalDateTime in time-line order ignoring the chronology.

This comparator differs from the comparison in Comparable.compareTo(T) in that it only compares the underlying date-time and not the chronology. This allows dates in different calendar systems to be compared based on the position of the date-time on the local time-line. The underlying comparison is equivalent to comparing the epoch-day and nano-of-day.

toEpochSecond

public long toEpochSecond (ZoneOffset offset)

Converts this date-time to the number of seconds from the epoch of 1970-01-01T00:00:00Z.

This combines this local date-time and the specified offset to calculate the epoch-second value, which is the number of elapsed seconds from 1970-01-01T00:00:00Z. Instants on the time-line after the epoch are positive, earlier are negative.

This default implementation calculates from the epoch-day of the date and the second-of-day of the time.

toInstant

public Instant toInstant (ZoneOffset offset)

Converts this date-time to an Instant.

This combines this local date-time and the specified offset to form an Instant.

This default implementation calculates from the epoch-day of the date and the second-of-day of the time.

toLocalDate

public abstract D toLocalDate ()

Gets the local date part of this date-time.

This returns a local date with the same year, month and day as this date-time.

toLocalTime

public abstract LocalTime toLocalTime ()

Gets the local time part of this date-time.

This returns a local time with the same hour, minute, second and nanosecond as this date-time.

toString

public abstract String toString ()

Outputs this date-time as a String.

The output will include the full local date-time.

with

public abstract ChronoLocalDateTime<D> with (TemporalField field, 
                long newValue)

Returns an object of the same type as this object with the specified field altered.

This returns a new object based on this one with the value for the specified field changed. For example, on a LocalDate, this could be used to set the year, month or day-of-month. The returned object will have the same observable type as this object.

In some cases, changing a field is not fully defined. For example, if the target object is a date representing the 31st January, then changing the month to February would be unclear. In cases like this, the field is responsible for resolving the result. Typically it will choose the previous valid date, which would be the last valid day of February in this example.

with

public ChronoLocalDateTime<D> with (TemporalAdjuster adjuster)

Returns an adjusted object of the same type as this object with the adjustment made.

This adjusts this date-time according to the rules of the specified adjuster. A simple adjuster might simply set the one of the fields, such as the year field. A more complex adjuster might set the date to the last day of the month. A selection of common adjustments is provided in TemporalAdjusters. These include finding the "last day of the month" and "next Wednesday". The adjuster is responsible for handling special cases, such as the varying lengths of month and leap years.

Some example code indicating how and why this method is used:

  date = date.with(Month.JULY);        // most key classes implement TemporalAdjuster
  date = date.with(lastDayOfMonth());  // static import from Adjusters
  date = date.with(next(WEDNESDAY));   // static import from Adjusters and DayOfWeek